CIRCUTOR AR5L Series - Manual (Page 43)

43
6.2.4.- ANGLE
To choose the parameter to be displayed between cos
ϕ or P.F (power factor)
NOTE: It’s not allow to save cos
ϕ
data in memory. Only can be read on
display.
6.3.- RUN: data recording process status
You can here enable or disable the data collection and logging action in the analyzer.
RUN
Run / Stop
- With keys [ 6 6 6 6], [5 5 5 5] RUN or STOP is selected.
- [ENTER] to validate or [ESC] to exit with no modification.
6.4.- FILES Menu
Non-volatile analyzer internal memory is storing data up to its maximum
capacity. Once full, neither new data will not be saved in, nor stored data will be lost
(provided no incorrect operation is done).
When memory is full, the display will show: "MEMORY FULL".
FILES FILES MENU
 DIR
DELETE
FORMAT
6.4.1.- DIR: Directory
This option shows on display a directory of all files saved in memory.
AR5-L - DIR
STD-PROG. STD xxxxx bytes File name / File size
dd / mm / yy hh : mm : ss Day / Time
TEST1. STD xxxxx bytes
dd / mm / yy hh : mm : ss
STD-PROG. STD xxxxx bytes
dd / mm / yy hh : mm : ss
...... / .............
Free bytes: xxxxxxxxxx
Number of free bytes in memory
-
Keys [ 6 6 6 6] or [5 5 5 5] allows reading more files in case that all files stored by
the analyzer cannot be shown in only one screen.
- Keys [ENTER] or [ESC] to exit.
6.4.2.- DELETE: Deleting a file