CIRCUTOR AR5L Series - Manual (Page 22)

22
of the capacitive reactive power of each phase and also the three phase total
instantaneous capacitive reactive power, which is the addition of each phase value.
Power factor : Readout of the power factor of each phase and the three phase
average value.
Frequency : Readout of the instantaneous value of the frequency (Hz).
Neutral Current : Readout the value measured of the neutral current. (only in
AR5-L model)
Apparent power : Readout of the three phase total instantaneous apparent,
which is the addition of each phase value.
Energies: Readout of active, inductive reactive, and capacitive energy
counters from the moment that the energy counters were reset to zero (see section
6.5.-)
Time and Date. (time/date): Readout of present time and date. For any
modification, see section 6.1.4.- CLOCK: Internal clock.
5.1.2.- Screen of maximum and minimum values
HARMONICS
MAX L1 L2 L3 III
Vp-n
A
kW
kvarL
kvarC
P.F.
Hz
kVA
A
N
220 221 223 221
kWh -0.000
kvarLh -0.000
kvarhC -0.000
25 / 10 / 03 17 : 31 : 29
Screen of maximum values
An indication of the type of data being displayed is shown at the upper
right corner: INST (Instantaneous), MAX (Maximum) or MIN (Minimum).
Maximum and minimum values displayed correspond to the maximum
and minimum values obtained from the instantaneous values.
The negative energy counters are then displayed in place of positive
energies.