Casella CEL Microdust 880 IS real time dust monitor - Manual (Page 24)

Microdust 880nm & WinDust Application Software
Handbook HB3255-03
Page 24 of 51
Recovered Data Options
The ‘Recovered Data’ dialogue box is used to specify the directory path into which Microdust data
files will be downloaded.
Since the Microdust may contain data relating to many different sampling runs, the downloaded data
will be split into individual files, each one representing a single run.
The ‘File Prefix’ is used to define the first 6 characters of all downloaded data file names. The last
two digits represent a unique number which is automatically allocated as each series of runs are
downloaded.
Example;- If the data directory contains the following files;-
DUCT01.DAT
DUCT02.DAT
and the Microdust contains two sampling runs, then after downloading the directory will
contain the following files.
DUCT01.DAT
DUCT02.DAT
DUCT03.DAT
DUCT04.DAT
A warning will be given if the downloading procedure detects that the file count for the current name
prefix would exceed 99 during download. If this occurs, then a new file prefix should be defined
before commencing the download procedure.
You have now successfully created a Microdust profile. To save the profile select File

Save from
the menu or click on the icon.