Casella CEL CEL-310 - Manual (Page 19)

3.5 Configure Dose Badge Settings
Settings to be used for some International Standards are given in Table 1.
PLEASE NOTE that changes to the Dose Badge configuration
are programmed into the Dose Badge ONLY when it is Reset.
1. While displaying the Main Menu, use or to select
Dose Badge Settings.
2. Press to display the Dose Badge Settings menu.
3. Use and to select the required setting (see Table 1).
4. Press again to save the setting and return to the Main Menu.
M-0x
Reader Main Menu
ISO (Q3 None 85 dB)
Time History Control
Criterion Time
Criterion Level
Dose Badge Settings
The current Dose Badge setting is
shown in the message line
OK
M-
Set Dose Badge Type
OSHA (Q5 Slow 90 dB)
ISO (Q3 None 85 dB) Two options are shown, with the
current setting highlighted.
OK
Configuration
CEL-310 Dose Badge Users Handbook - Page 19