ABUS Technologies A9696 Series Universal Controller - Manual (Page 4)

ABUS TECHNOLOGIES INC.
4
A9696
1. INTRODUCTION
A9696 Big Digit Universal Process Controller is a real breakthrough in versatility
for holding in one single instrument for all the major features required in the vast
majority of industrial processes. With sophisticated and consistent software and its
advanced truly universal circuitry, the A9696 accepts configuration of both input signal
and control output through the front keyboard without any internal hardware change.
Power supply for remote loop powered transmitters is standard and is a must
for high-end applications. From the very simple applications as a temperature
controller to the most complex systems of distributed control with PLC’s or SCADA
networks, the A9696 is the right answer to your needs for industrial or laboratory
automation.
2. PRESENTATION
2.1 Features
1. Universal multi-sensor input without hardware change;
2. Sensor break protection in any condition;
3. Control outputs: relay, linear 4-20 mA, 0-20 mA, logic pulse;
4. Up to 4 alarms. Up to 2 timer relay alarms;
5. PV or SP 4-20mA or 0-20mA analog retransmission;
6. Auto/Manual “bump less” transfer;
7. Up to 2 digital inputs with 5 programmable functions;
8. 4-20 mA Remote Set-point input;
9. Programmable Soft Start (0 to 9999 seconds);
10. RS-485 digital communication; RTU MODBUS Protocol;
11. Firmware version displayed during power up;
12. Keyboard password protection;
13. RS-485, MODBUS RTU protocol, 1200 to 19200 bps;