Directed Electronics Ready Remote User Manual

Page 60

When you are ready to drive the vehicle:

Insert the ignition key and turn it to the

ON (not the START) position.

Press the brake pedal.

While the vehicle is running during remote start operation, the

system will monitor the vehicle and will automatically shut

down the engine if the system receives any of the following shut-

down inputs:

■ The brake pedal is pressed.

■ The hood is opened.

■ The shutdown toggle switch is put into the ON position.

■ The pre-programmed run time has elapsed (12-minutes).

■ The

button is pressed twice.

■ The tachometer is either too high or low.

■ The battery voltage is too low.

PROG

ARM

DISARM

noottee:: If the brake pedal is pressed
before the key is in the ON posi-
tion, the engine will shut down.