Directed Electronics Ready Remote - Manual (Page 22)

18 © 2 0 0 6 D i r e c t e d E l e c t r o n i c s
insulation off a small portion and solder the thick ORANGE (3)
wire of the heavy gauge wire and wrap it with electrical tape.
If your vehicle requires more than one accessory, an additional
relay (not provided) is required. Refer to the diagram below.
Now that the accessories have been located, find the wire
suspected to be the starter wire according to the web information
on your vehicle. Place the red lead of your LED tester on the
87
87A 86 85
30
+12 VDC CONSTANT (FUSED 20A)
GROUND
TO 2nd ACCESSORY
ORANGE (+) 30A OUTPUT TO
ACCESSORY CIRCUIT
TO ACCESSORY
2nd ACCESSORY RELAY
(NOT PROVIDED)
87
87A 86 85
30
+12 VDC CONSTANT (FUSED 20A)
GROUND
TO ACCESSORY
ACCESSORY RELAY
(NOT PROVIDED)