Dolby Laboratories KDC-W8534 User Manual
Page 39
English
|
39
In Standby mode
Date Adjustment
1
Select Date Adjust mode
Push the knob towards [FM] or [AM].
Select the "Date Adjust" display.
2
Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
3
Selecting the item (day, month, or year) to
adjust
Push the Control knob towards [
4] or
[
¢].
The items that are blinking are items that you
can adjust.
4
Adjust each item
Push the Control knob towards [FM] or [AM].
5
Repeat step 3 and 4 operation and adjust the
date.
6
Exit Date adjustment mode
Press the [MENU] button.
In Standby mode
Date Mode
Setting the date format.
1
Select Date Mode
Push the Control knob towards [FM] or [AM].
Select the "Date Mode" display.
2
Select the date format
Push the Control knob towards [
4] or
[
¢].
3
Exit Menu mode
Press the [MENU] button.
In Standby mode
Synchronize Clock
Synchronizing the RDS station time data and this
unit’s clock.
Display
Setting
"SYNC : ON"
Synchronizes the time.
"SYNC : OFF"
Adjust the time manually.
• It takes 3 to 4 minutes to synchronize the clock.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display
Setting
"DSI : ON"
LED flashes.
"DSI : OFF"
LED OFF.
In Standby mode
Manual Clock Adjustment
• You can do this adjustment when the Clock> (page 39) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [ 4] or [ ¢]. 4 Exit Clock adjustment mode Press the [MENU] button.
Select the "Clock Adjust" display.
The clock display blinks.