General features – Dolby Laboratories KDC-W8534 User Manual
Page 14
14
|
English
Sound Management system
1
Select the source to adjust
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "S.M.S" is
displayed above the [2] button.
Refer to
(page 9).
3
Enter Sound Management mode
Press the [2] ("S.M.S") button.
• When "2 ZONE" of
you cannot select "S.M.S".
4
Select the Sound Management item to
adjust
Press a [1] — [5] button.
Multi-function key operation
Sound Management Item
[1] "CABIN"
Cabin Setting
[2] "F"
Speaker Select Front
[3] "R"
Speaker Select Rear
[4] "SW"
Speaker Select Subwoofer
[5] "Preset"
[1] "RCL"
[2] "MEM"
Recall mode
Memory mode
• "Preset": You can store an adjusted sound
management system value by selecting
"MEM". Refer to
Also, you can recall it by selecting "RCL". Refer
to
5
Adjust the Sound Management item
Push the Control knob towards [
4] or
[
¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Sound Managemnt Item
Range
Cabin Setting
OFF/ Compact/ Sedan/ Wagon1/
Wagon2/ Mini Van1/ MiniVan2/ SUV/
Passenger Van
Speaker Select Front
16cm/ 17cm/ 18cm/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ O.E.M./ 10cm/ 13cm
Speaker Select Rear
16cm/ 17cm/ 18cm/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ None/ O.E.M./ 10cm/ 13cm
Speaker Select Subwoofer
25cm/ 30cm/ 38cm over/ None/
16cm/ 20cm
6
Exit Sound Managemnt mode
Press the [6] ("RTN") button.
General features