Dolby Laboratories KDC-W8534 User Manual
Page 17
English
|
17
Memory mode
Storing the values of Field Control in memory.
1
Adjust the item you wish to put in memory
By referring to
you wish to put in the memory.
2
Select the Preset Memory item
Press the [5] ("Preset") button.
3
Enter Memory mode
Press the [2] ("MEM") button.
4
Put in the memory
Press the [1] ("MEM.1")/ [2] ("MEM.2") button
for at least 2 seconds.
5
Exit Memory mode
Press the [6] ("RTN") button.
• "MEM.1": When you press the Reset, all the sources will
be the setting value which is registered.
• The following items cannot be registered.
System Q Setting, Position Setting
Memory Recall mode
Recall the value in the memory by the memory
mode.
1
Select the source to adjust
Press the [SRC] button.
2
Select the key function
Press the [1]("S.F.C")/[2]("S.M.S")/[3]("EQ")
button.
Refer to
(page 9).
3
Select the Preset Memory item
Press the [5] ("Preset") button.
4
Enter recall mode
Press the [1] ("RCL") button.
5
Select the recall item
Press the [1] ("RCL 1")/ [2] ("RCL 2") button for
at least 2 seconds.
"RCL 1": Recall the value put in "MEM.1" by
"RCL 2": Recall the value put in "MEM.2" by
6
Exit Memory Recall mode
Press the [6] ("RTN") button.