Altera PCI Development Kit, Cyclone II Edition Getting Started - Manual (Page 23)

Altera Corporation Core Version a.b.c variable 2–13
May 2005 PCI Development Kit, Cyclone II Edition Getting Started User Guide
Getting Started
PCI Master Loop (Debug Tab)
In this example, a PCI master read is followed by a PCI master write
transaction. The kit’s application verifies that the data read and written
by the master is the same.
1. Ensure that the Debug tab is active.
2. Select Master Loop from the Commands box.
3. Keep the Address Offset setting of 0x0000000.
4. Specify the following settings in the Address/Size box:
● Transfer Length: 4096
● Iterations: 2
5. In the Data Type list, select AA55 Packet.
6. Click Execute.
7. Review the results in the Display Window (see Figure 2–7 ).
Figure 2–7. PCI Master Loop (Debug Tab)