Altera Arria GX - Manual (Page 27)

Altera Corporation Getting Started User Guide A–9
October 2007 Arria GX Development Kit
11. Click on the EPM570 device to highlight it, then right-click it and
select Change File to select a file.
12. Find and select the pfl_3fe.pof file in the Programming Files
directory, and click Open. The pfl_3fe.pof file defines the PFL
design for the MAX II device, shown as EPM570F100 in
Figure A–8 .
Figure A–8. Open the PFL Design File
13. If the CFI_512MB flash device is listed under the EPM570F100
device as shown in Figure A–8 , go to step 15 . Otherwise, highlight,
then right-click pfl_3fe.pof in the Programmer, then click the Attach
Flash Device
option.
14. Highlight and check CFI_512MB ( Figure A–9 ) and click OK.