Altera MAX 10 FPGA - Manual (Page 17)

Chapter 3: Board Components 3–5
Configuration
October 2014 Altera Corporation MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit
User Guide
4. To set the ICB settings, click Option/Boot Info button. An ICB setting dialog box
will appear.
Several ICB settings can be set through the ICB setting dialog box, including:
■ Power on Reset Scheme: Instant On, Fast POR Delay or Slow POR Delay.
■ Enable user IOs week pull up during configuration check box.
■ Enable the JTAG Security check box.
■ Verify Protect check box.
■ Enable watchdog for dual boot and watching value (initially grayed out, after
add 2 sof page with 2 design that compiled with Dual Compressed Internal
Images, the watchdog setting will then be enable).
■ User Flash Memory settings.
5. In the File name box, specify the file name for the programming file you want to
create.
6. To generate a Memory Map File (.map), turn on Create Memory Map File (Auto
generate output_file.map ). In the .map file, not only will show the address of the
CFM and UFM, but also will contain the information of the ICB setting that user
set through the Option/Boot Info dialog box.
7. You can add an SRAM Object File (.sof) through Input files to convert list. The
maximum sof page is two.
8. After set all the desirable settings, click Generate to generate related programming
file.