Woodhaven 7660: Large Half-Blind Router Table Dovetail Jig w/Bit - Manual (Page 2)

2
Assembled
Drawer
Components
Side should be inset 1/64”
or less from end of Face.
Drawer Side:
Inside Face
Drawer Side:
Inside Face
Drawer Back:
Inside Face
Cut 1/32” longer then
desired fi nished length.
Drawer Front: Inside Face
Cut 1/32” longer then desired fi nished length.
ss from ss from
C3 C2
D3
D4
B2
B1
A1 A4
Part Marking
Suggestion:
Mark mating ends with
numbers so you know
which parts need to
be done as pairs.
Bottom of drawer groove
typically 1/4” to 1/2”
above bottom of drawer