Waldorf Lector - Manual (Page 7)

Installation
7 Lector User´s Manual
Installation
System Requirements for Windows PC
In order to be able to use Lector, you will need at least:
 A PC with an Intel Pentium3 or AMD Athlon 1 GHz
processor or better, we recommend a fast CPU
 64 MB free RAM
 Windows XP or newer
 VST 2.4 compatible host application such as Cubase
SX 3 or newer or a VST3 compatible host application
as Cubase 4 or newer which must be correctly
installed on your computer.
w
Please also observe the system requirements of your
host application!
w
Lector can be installed under Windows
VISTA/Windows 7 64 Bit. Please keep in mind that
Lector will run as 32 bit application.
Installation under Windows
Proceed as follows to install Lector:
Installation from CD-ROM:
1. Start your computer and launch your operating system.
Insert the Lector CD-ROM into your DVD/CD-ROM drive.
If you have enabled the Autostart function in Windows,
the Installer will start automatically and you can proceed
with Step 5 below. If not, please proceed as follows:
2. Launch the Explorer or open the window “My
Computer”.
3. Double click on the icon for the drive that holds the
Lector-CD-ROM.
4. Double click on the Lector Installer icon. This launches
a special installation program.
5. Follow the on-screen instructions.
w
After installing Lector you will have to activate the
program on your computer Please refer to the chapter
“Activation of Lector”.
Installation of a downloaded Installer File:
1. Refer to the folder where the downloaded Lector zip
archive is located.
2. Double click on the archive file to extraxt it.