Waldorf Wave 3.v - Manual (Page 58)

The Controls
PPG Wave 3.V User´s Manual 58
START
Start normally marks the beginning of a sample. Higher
settings than 0 change the sample start.
LOOP ON / OFF
Activates the loop of a sample. WAV or AIFF samples can
contain loop information which will be automatically
recognized by the PPG Wave 3.V. You can also manually
activate a sample loop and set its start and end point.
LOOP START
Marks the start point of a sample loops.
LOOP END
Marks the end point of a sample loops.
w
If you want to use samples with advanced loop
functions we recommend to use a dedicated audio
editor like for example Steinberg Wavelab (Mac &
PC), BIAS Peak (Mac) or Skylife SammpleRobot (PC).
The PANEL Button
You can hide the panel section by pressing the PANEL
button.
Click on any other menu button to open the desired panel
again.