Waldorf Wave 3.v - Manual (Page 48)

The Controls
PPG Wave 3.V User´s Manual 48
The GROUP Button
Click on this button to activate the Group function. No
additional menu is available. The buttons lits blue when
activated.
When grouped, all eight parts can be edited
simultaneously. This is useful when working with Multi
samples on different parts. Please read also the chapter
about Transients.
Example: If you change the CUTOFF parameter in Part 1,
it will also be changed on Part 2 to 8. Some parameters
are not affected by the Group functions, as CHANNEL,
VOLUME, Key-Ranges etc.
Click on the GROUP button again to deactivate this
function.
The Effects Panel (EFFECTS)
The Effects panel offers a wide range of different effects for
the PPG Wave 3.V sound programs. To open the Effects
Panel, click on the EFFECTS button. The button lights up
in blue.
The PPG Wave 3.V offers a separate effects unit for each
Part. Click on the SHARED button when you want to use
the effects form Part 1 for all other parts.
Click to OFF or ON to deactivate or activate the
corresponding effect as desired.
Click on the corresponding effect name to display
parameters for editing.
Some effects (Phaser, Chorus, Delay, Reverb) offer a Mix
parameter. This parameter controls the volume ratio
between the original signal and the effect output. If set to
0%, the dry signal is sent to the outputs only so that no
effects can be heard. Higher values will increase the effect