Vortech 2011-2012 6.4L Hemi Challenger User Manual

Page 16

P/N: 4CL020-020 v1.0, 12/02/2014

E. Sandwich the power steering pump between

the steel plate and the supercharger mounting

plate, making sure to install the (2) supplied

power steering pump spacers (one pictured).

Secure the power steering pump to the bracket

using the (3) supplied screws & washers. At this

point, tighten the two screws attaching the steel

bracket to the primary mounting plate. (Loosely

installed in Step D.) (See Fig. 5-e)

F. Using the supplied allen-head screw, install the

power steering adaptor block & fittings to the

power steering pump at this time, making sure

not to pinch or damage the o-ring. You may need

to make adjustments to the fittings for proper

clearance. (See Fig. 5-f)

G. Use Fig. 5-g as a visual representation of how the

power steering pump adaptors are supposed to

be clocked once installed on the bracket. Adjust

as necessary.

SUPERCHaRGER MOUNTING PLaTE INSTaLLaTION, CONT’D

P/S PUMP

SPACERS

(ONE SHOWN)

SUPPLIED P/S

PUMP HARDWARE

Fig. 5-e

Fig. 5-f

INSTALL FITTINGS TO PUMP HERE.

ADJUST CLOCKING AS NECESSARY

Fig. 5-g

P/S ADAPTOR FITTINGS