Two Notes VB-101 - Manual (Page 49)

Specifications
Designation Characteristics
S/PDIF
Sampling frequency: 44.1 kHz to 96 kHz
Master or slave configuration
Switchable dry or wet signal on each channel
AES/EBU
Sampling frequency: 44.1 kHz to 96 kHz
Master or slave configuration
Switchable dry or wet signal on each channel
ADC
Gain controlled by digital potentiometer, -95 dB to 0 dB
Minimal full-scale input level: 2.7 dBu (Line Input)
Sampling frequency: 192 kHz
Resolution: 24 bits
Signal to noise ratio: 103 dB
DAC
Sampling frequency: 96 kHz
Resolution: 24 bits
Signal to noise ratio: 95 dB
Frequency response (-1db) 20 Hz - 45 kHz
Signal to noise ratio (SNR) >95 dB
Latency (Normal latency mode) 4.8 ms, (Low Latency mode) 2.875 ms (Line Input to Line Output)
Thermal security
Temperature-controlled fan
At 70°C, a visual warning is displayed and the output signal is muted.
At 85°C, the loadbox is disconnected, the amplifier sees a 160-Ohm security load to help
lowering the temperature by taming the amplifier
Power supply
IEC60320 C14 power connector
Input voltage: 110, 115 or 230 V AC (depending on the country of purchase), 50-60 Hz
Power: approx. 10 W
Dimensions
Width: 430 mm, 483 mm including rack-mounting edges
Depth: 307 mm, 355 mm including connectors and knobs
Height: 90 mm
Weight: 7.5 kg
Two Notes Audio Engineering Torpedo VB-101 49