Two Notes VB-101 - Manual (Page 18)

Quick start guide
4.3 Dual Miking
This new functionality of the TORPEDO VB-101 in version 2.0 of the firmware is what every sound en-
gineer wants: the possibility of carefully placing two microphones before the cabinet, or of selecting
two different cabinets and microphones and mixing them.
You will discover the unlimited possibilities of dual miking: add up to two microphone and cabinet
configurations and mix them in mono, in real time.
The IDLE display screen will show the A and B configurations. In the MIKING section, you will choose
the configurations, adjust the parameters, and mix them in mono.
4.4 Post FX section
When recording guitars or basses, it is common to apply a few effects to shape the sound before it
is sent to a PA or a recorder. In the TORPEDO VB-101 you will find a simple but efficient EQ filter with two
modes, GUITAR or BASS, a 1-band Exciter, a studio Compressor, and a Spatializer that is particularly
useful when playing with headphones.
4.5 Third-party impulse responses
The TORPEDO VB-101 is capable of delivering the best guitar and bass tones by using the TORPEDO
technology, but you can also embed impulse responses that you have purchased or downloaded
for free from 3rd-party developers, in WAV or AIFF formats.
You can upload third-party IRs in the TORPEDO VB-101, by way of the free Torpedo Remote soft-
ware.
4.6 Create your own IRs
Download the free TORPEDO Capture software from the Two Notes website . With this software you
will be able to capture your own cabinet + microphone setup and embed its sound signature into
the TORPEDO VB-101.
5 TORPEDO VB-101 quick start
The TORPEDO VB-101 is set up to be connected, right out of the box, to a guitar or a bass amplifier,
and used with headphones. You will just need a guitar or bass amplifier with a 8-Ohm Speaker Output
and headphones.
18 Two Notes Audio Engineering Torpedo VB-101