Two Notes VB-101 - Manual (Page 29)

Configuring and using TORPEDO VB-101
3 Main control panel
Figure 5.2: TORPEDO VB-101 main control Panel
1 Preset number 5 Escape switch 9 Simulation bypass 13 Program menu
2 Global settings 6 Navigation encoder 10 Virtual miking menu
3 192X64 graphic display 7 POST FX bypass 11 Speaker & microphone selection menu
4 Validation switch 8 POST FX menu 12 Compare switch
The TORPEDO VB-101 control panel includes the various knob and switch controllers that give
access to the machine and/or sound parameters.
You can access any menu by pressing the corresponding switch. The navigation encoder has
various functions:
• browsing the presets if you are on the PERFORM screen,
• browsing the parameters if you are on a menu screen,
• modifying the parameter that you have selected.
To access any given parameter setting or to validate it, press the "OK" switch. To cancel any
change made to the parameter setting, or to go back to selecting parameters, press the "ESC"
switch.
4 SETUP
The SETUP menu is where you will configure the unit. The parameters that are set up here will apply
to all the presets and be retained when the TORPEDO VB-101 is turned off.
Two Notes Audio Engineering Torpedo VB-101 29