beautypg.com

Mains power, Ground connection, Mains fuse – Two Notes VB-101 User Manual

Page 10: Safety use conditions, Cleaning, Maintenance

background image

Foreword

1.3

Mains power

Please verify that the voltage required by the device matches the voltage of your country. If not or

if unsure, do not plug the device to the wall outlet, as this could result in damages to the device and

injuries to the user. This product must not be used during lightning storms. In case of severe weather

with a risk of lightning, unplug the mains power supply to reduce the risk of electric shock and fire.

The mains power cable provided with the machine complies with the standards of the country where

you purchased the product. If replacement is needed, please use a standard compliant cable.

1.4

Ground connection

For safety reasons, the machine needs to be plugged into a wall outlet providing a ground con-

nection. If your electric installation does not provide a ground connection or if you are unsure, please

ask a qualified electrician for help.

If your mains power cable does not match your wall outlet, ask a qualified electrician for help.

In order to prevent risks of electric shock or fire, never remove the outer or inner ground connection

of the unit.

1.5

Mains fuse

The unit comes with a thermal fuse in the mains power input. If replacement is needed, first unplug

the mains power cable. Always use a fuse of the same type as the original one.

To prevent risks of electric shock and fire, never try to bypass the fuse by any means

1.6

Safety use conditions

The TORPEDO VB-101 must never be used:

• near a heat source,

• near a flame,

• in the rain,

• in damp areas,

• near any kinds of liquids.

The unit is designed to be rackmounted into a 19" rack unit with 4 screws (not provided).

When transporting the unit, care needs to be taken to avoid any shocks that might cause damage

and therefore require the assistance of a qualified technician.

Never cover or restrict the ventilation openings. Never unplug or deactivate the heat control

monitoring system, or you will be exposed to risks of electric shock and fire.

1.7

Cleaning

Always use a dry and soft cloth with no alcohol or solvent for cleaning. Please keep the unit clean

and free from dust.

1.8

Maintenance

Any and all maintenance tasks must be performed by service centers approved by OROSYS SAS

or by qualified technicians. Never try to repair the machine by yourself.

10

Two Notes Audio Engineering

Torpedo VB-101