Two Notes VB-101 - Manual (Page 22)

Connecting the TORPEDO VB-101
2 On stage
The analog I/O of the TORPEDO VB-101 offers great options on stage. For example, the analog
outputs (number 10 in figure 3.2) can be connected at the same time both to the front mixing console
and to a monitoring system (not shown here).
THRU INPUT
8 Ohms 150W RMS
POST SIMULATION PRE SIMULATION
LEFT RIGHT
S/PDIF AES/EBU
IN
IN
OUT
OUT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE.
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK CAUTION
DO NOT REMOVE COVER.
! CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION REPLACE FUSE WITH SAME FUSE TYPE AND RATING
POWER
ALWAYS CONNECT YOUR AMP OUTPUT TO A SUITABLE LOAD.
DO NOT SET YOUR AMP MASTER VOLUME TO MAX IN ORDER
TO AVOID POSSIBLE DAMAGES.
NOTICE
SERIAL NUMBER
MADE IN FRANCE
Ro H S
2002/95/ EC
ANALOG OUPUTS ANALOG INPUT
USB
WORDCLOCK
IN
SYNC
SPEAKER
DIGITAL I/0 OPTIONAL ETHERNET
AUDIO ENGINEERING
IN OUT/THRU
MIDI
2
3
4
5
6
1
SPEAKER OUTPUT 8 OHMS
150 W RMS max
Big Amp
O
I
1 Electric guitar or bass 3 MIDI pedalboard 5 Mixing console
2 Guitar or bass amplifier 4 TORPEDO VB-101 6 PA
Note that the musician can, with a MIDI floorboard, control the parameters (CONTROL CHANGE)
and/or the presets (PROGRAM CHANGE) of the TORPEDO VB-101.
Playing in silence is a great feature, but at some point you do need to listen to what you play!
Here are a few options for use at home, in the studio, or on stage:
1. Listening through the Headphones output,
2. Listening via a guitar/bass cabinet plugged into the TORPEDO VB-101 THRU output,
3. Having a local monitoring system on stage, by duplicating the LINE OUTPUT with a mixer,
4. Having in-ear monitors or wedge speakers controlled by a sound engineer.
The THRU, S/PDIF and LINE outputs can be used simultaneously.
22 Two Notes Audio Engineering Torpedo VB-101