Two Notes VB-101 - Manual (Page 27)

Part 5
Configuring and using TORPEDO VB-101
1 The TORPEDO VB-101’s interface
The TORPEDO VB-101 parameters are organized in menus that can be accessed with various
switches and knobs.
You will find three types of controllers:
• three rotary encoders: input gain, output volume, navigation (NAVI);
• ten switches: SETUP, PROGRAM, COMPARE, SPKR/MIC, MIKING, POST FX, OK, ESC, two BYPASS;
• one potentiometer: to control the headphones output volume.
Every action performed appears on the main screen of the unit (number 4 in figure 3.1). The
two-digit display (number 3 in figure 3.1) lets you know what preset number you are currently on.
Here is a representation of the screen displayed in PERFORM mode. The PERFORM screen is the
default screen you will see when first using the TORPEDO VB-101. From that mode you can navigate
the presets. This is the mode you will be on when you are playing without editing or changing any
parameter.
Figure 5.1: TORPEDO VB-101 default screen
1 A and B speakers 4 A and B microphones 7 Digital output frequency
2 Preset name 5 USB connected 8 Digital sync
3 Input gain and Output volume 6 MIDI signal
In the following paragraphs, we will illustrate all the commands and menus available from the left
to the right of the unit.
Two Notes Audio Engineering Torpedo VB-101 27