Two Notes VB-101 - Manual (Page 25)

Connecting the TORPEDO VB-101
On the following table we are listing the various options you have with the TORPEDO VB-101. It is
very hard to play while hearing a dry sound only, and we indicate on which channel you can get
a wet signal (i.e., with the speaker simulation on). You can choose to record the Wet signal or not,
depending on your DAW configuration and capability.
Dry channel Wet channel Output mode Note
PRE SIM
Analog or digital
I/Os
Stereo or
Dry/wet or
Wet/dry
Use this mode if you want to use your own audio interface to perform
the analog-to-digital (AD) conversion
Analog or Digital Out LEFT
Analog or digital
I/Os RIGHT
Dry/wet Use this mode to use the TORPEDO VB-101 for the AD conversion
Analog or Digital Out RIGHT
Analog or digital
I/Os LEFT
Wet/dry Use this mode to use the TORPEDO VB-101 for the AD conversion
4.2 Step two: re-miking the signal
You need to build a loop between the TORPEDO VB-101 and your DAW. You can create either a
digital or an analog loop. To create a loop, connect both input and output of the TORPEDO VB-101
to the DAW:
1. The dry signal is sent from the DAW to the TORPEDO VB-101. On most sequencers, that track
must be routed to a dedicated output, not the master output track.
2. Choose the appropriate miking parameters on the TORPEDO VB-101; the dry signal is processed.
3. The wet, processed signal is sent to a new track on the DAW. That track can be routed to the
master track and activated for real-time listening.
THRU INPUT 8 Ohms 150W RMS
POST SIMULATION PRE SIMULATION
LEFT RIGHT S/PDIF AES/EBU
IN IN OUT
OUT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE. CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK CAUTION DO NOT REMOVE COVER. ! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION REPLACE FUSE WITH SAME FUSE TYPE AND RATING
POWER
ALWAYS CONNECT YOUR AMP
OUTPUT TO A SUITABLE LOAD.
DO NOT SET YOUR AMP MASTER VOLUME TO MAX IN ORDER TO AVOID POSSIBLE DAMAGES .
NOTICE
SERIAL NUMBER MADE IN FRANCE
R o H S 2002/95/EC
ANALOG OUPUTS ANALOG INPUT
USB
WORDCLOCK
IN SYNC
SPEAKER
DIGITAL I/0 OPTIONAL ETHERNET
AUDIO ENGINEERING
IN OUT/THRU MIDI
THRU INPUT 8 Ohms 150W RMS
POST SIMULATION PRE SIMULATION
LEFT RIGHT S/PDIF AES/EBU
IN IN OUT
OUT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE. CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK CAUTION DO NOT REMOVE COVER. ! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION REPLACE FUSE WITH SAME FUSE TYPE AND RATING
POWER
ALWAYS CONNECT YOUR AMP
OUTPUT TO A SUITABLE LOAD.
DO NOT SET YOUR AMP MASTER VOLUME TO MAX IN ORDER TO AVOID POSSIBLE DAMAGES .
NOTICE
SERIAL NUMBER MADE IN FRANCE
R o H S 2002/95/EC
ANALOG OUPUTS ANALOG INPUT
USB
WORDCLOCK
IN SYNC
SPEAKER
DIGITAL I/0 OPTIONAL ETHERNET
AUDIO ENGINEERING
IN OUT/THRU MIDI
THRU INPUT 8 Ohms 150W RMS
POST SIMULATION PRE SIMULATION
LEFT RIGHT S/PDIF AES/EBU
IN IN OUT
OUT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE. CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK CAUTION DO NOT REMOVE COVER. ! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION REPLACE FUSE WITH SAME FUSE TYPE AND RATING
POWER
ALWAYS CONNECT YOUR AMP
OUTPUT TO A SUITABLE LOAD.
DO NOT SET YOUR AMP MASTER VOLUME TO MAX IN ORDER TO AVOID POSSIBLE DAMAGES .
NOTICE
SERIAL NUMBER MADE IN FRANCE
R o H S 2002/95/EC
ANALOG OUPUTS ANALOG INPUT
USB
WORDCLOCK
IN SYNC
SPEAKER
DIGITAL I/0 OPTIONAL ETHERNET
AUDIO ENGINEERING
IN OUT/THRU MIDI
1 2 3
Line Out L R
Line In L R
Line In
Line Out
S/PDIF Out
L+R
S/PDIF In
L+R
S/PDIF In
L+R
S/PDIF Out
L+R
Wordclock
Out
Wordclock
In
AES Out
L+R
AES In
L+R
AES In
L+R
AES Out
L+R
Wordclock
Out
Wordclock
In
Audio Interface Audio Interface Audio Interface
Dry send (DAW to TORPEDO) Wet return (TORPEDO to DAW) Dry track status Wet track status
1 Line Out to Line In Line Out to Line In
Routed to Line out
(not Master)
Routed to Master
2 S/PDIF Out to S/PDIF In S/PDIF Out to S/PDIF In
Routed to S/PDIF Out
(not Master)
Routed to Master
3 AES Out to AES In AES Out to AES In
Routed to AES Out
(not Master)
Routed to Master
Note: Wordclock is optional in a digital loop. Use it if you have several digital products that need
to be synchronized to your DAW.
Two Notes Audio Engineering Torpedo VB-101 25