Turning Technologies TurningPoint 5 - Manual (Page 5)

Receiver Connection Setup
When the receiver is plugged in,
it is automatically recognized by
the computer. The default channel
on the RF receiver is set to 41. IR
receivers do not work on channels
and require no adjustments.
1. Plug in the receiver and open TurningPoint .
2. Click the channel number below Receiver . The
Preferences window opens.
3. Select the
channel number from the drop-down
menu under ResponseCard Channels. Once the
receiver has been set up, it is now possible to
begin testing the polling connections.
Setting Up a Receiver
RF Receiver
RF+ Receiver
IR Receiver
How to Change the Channel
on the Receiver
receiver
connection
setup