Turning Technologies TurningPoint 5 - Manual (Page 22)

responsecard
rf
and
responsecard
rf
lcd
channel
setting
Channel Setting (Optional)
ResponseCard RF and ResponseCard RF LCD
1. Press and release the button.
2. While the light is flashing red and
green, enter 2 digit code.
(i.e. channel 1=01, channel 21=21).
3. After the second digit is entered,
press and release the button.
LED Color Description
Red - Response was not received
Green - Response was received
Yellow (Multiple Flash) - Sending
Yellow (Single Flash) - Polling not open
ResponseCards are set to Channel #41 by default.
Changing the Channel