Taser X2 - Manual (Page 9)

9
X2 CEW Features
Get to know the X2 CEW:
Top & Bottom LASER
Blast Door
Flashlight
Selector Switch
Trigger Switch
Power Magazine
Release
Safety Switch
Power Magazine
ARC Switch
Cartridge Release Button
(underneath cartridge bays)
AFIDs
Wire
Probe
Index Finger Rest
Front Sight
Rear Sight
Mounting Rail
Safety Switch
Ambidextrous safety can be operated from either side of the CEW.
• Safety switch down (SAFE).
• Safety switch up (ARMED) and ready to deploy.
• Do not block the safety on one side of the X2 CEW while attempting to move it on the other side. This can
break the safety and disable the CEW.
• With default settings, if the X2 CEW’s safety switch is left in the up (ARMED) position for more than 20 minutes,
the system goes into low power mode to reduce the amount of power consumed. Power is still consumed
and will eventually drain the battery if the ‘safety switch remains in the ‘ARMED’ position. To re-arm the CEW,
shift the safety to the down (SAFE) position, and then shift it back to the up (ARMED) position.
Features
3