Taser X2 - Manual (Page 42)

42 Chapter 4 Cartridges & CEW Operation
Drive-Stun Backup
Drive-stun capability is available with the X2 CEW. To apply a drive-stun, place the safety in the up (ARMED)
position and press the ARC switch, just as you would to employ a Warning Arc display.
Use the ARC switch instead of the trigger to activate the X2 CEW for a drive-stun. When you use the ARC switch,
energy will spark across all the electrodes or arc deflector metalized labels without deploying the cartridges.
The drive-stun mode is not designed to cause incapacitation and generally becomes primarily a pain compliance
option. Probe deployment is usually considered more desirable if incapacitation is the desired objective, even
at close range. Some of the advantages of probe deployment include:
• Drive-stun is only effective while the CEW’s electrodes are in direct contact with the subject or when
pushed against the subject’s clothing. As soon as the CEW is moved away, the energy being delivered to
the subject stops. Deploying the probes allows the user to separate from the subject while increasing the
ability to maintain control.
• Due to automatic reflex actions, most subjects will struggle to separate from the CEW. Each time the
CEW comes back in contact with the subject, another set of marks may be visible on the subject's skin or
clothing. Using the probes allows for one point of discharge.
• If the probes are deployed, even at very close range, the user may drive-stun to another portion of the
body that is further away from the probes, thereby increasing the possibility of inducing incapacitations.
If the drive-stun is not effective, evaluate the location of the drive-stun, consider an additional cycle to a different
pressure point, or consider alternative force options.
When using the drive-stun, push (drive) the front of the X2 CEW firmly against the body of the subject. Simply
“touching” the X2 CEW against the subject is not sufficient. The subject is likely to recoil and try to get away from
the CEW. It is necessary to aggressively drive the front of the CEW into the subject for maximum effect.
Recommended Drive-Stun Areas for Maximum Effect
Only use the X2 CEW pursuant to your agency's policies and guidance. Drive the X2 CEW into the following
areas for maximum effectiveness: