Taser X2 - Manual (Page 13)

13 Chapter 3 Features
even if your finger is still pulling the trigger switch or pressing on the ARC switch. To reenergize the deployed
cartridge, first ensure that your finger is off the trigger switch, and then press the ARC switch. To reenergize the
ARC switch, remove your finger from the ARC switch and re-press the ARC switch.
Automatic Shut-Down Performance Power Magazine (APPM) Battery Pack
Replacing the APPM with a Different Battery Pack
Your CEW will recognize the APPM as a unique type of battery pack. If you remove the APPM and replace it
with a different type of battery pack, the X2 CEW will return to its normal configuration. That is, there will no
longer be an audio alert, and the energy cycle will continue after 5 seconds if your finger is still holding down
the trigger or ARC switch. Always confirm that the CEW performs as expected before returning it to duty after
changing any battery pack.
Remove the cartridges before testing the CEW function. See the Unloading section in this manual for more
information.
Advanced Central Information Display (CID)
The Advanced CID is a monochrome organic light emitting diode (OLED) on the back of the X2 CEW that provides
information about the CEW. When the safety switch is shifted into the up (ARMED) position, the CID will display
the cartridge bays and battery status.
35-Foot Cartridges
Selected Cartridge
Operating Mode
Energy Cell Indicator:
81-100% Remaining
Cartridge Icons
Left to right: 15-, 25-, and 35-foot live cartridges. These cartridges have not been
deployed.
Training cartridges (blue blast doors) will display with a yellow icon.
Loading training cartridges into the X2 CEW will not affect the CEW’s ability to
deploy. If both live and training cartridges are loaded in the X2 CEW, both firing
bays remain active. Loading a training cartridge into an X2 CEW will not lock a
live cartridge that is also loaded in the CEW.
The currently selected cartridge will have a yellow bar underneath it. If you pull the
trigger switch, this is the cartridge that will be deployed.
After a cartridge has been expended, the cartridge deployed icon is displayed.