Spectrum Controls 1734sc-IF4U - Manual (Page 30)

3-8 Point IO™ 4 Channel Universal Analog Input Module
User’s Manual Pub. 0300266-01 Rev. A
3.4.1 Installing the Add-On profile
1.) Download the zipped file from the Spectrum Controls website and unzip
the file ( http://www.spectrumcontrols.com/downloads.htm )
2.)
Open the created folder and double-click on the MPSetup.exe file.
3.) Follow the online prompts.
3.4.2 Adding the IF4U Module To Your Logix Project
Once the profiles are installed you can access them through RSLogix 5000 via the I/O
Configuration. Follow the procedure below to add a module:
1.) Before you can add the 1734sc-IF4U to your RSLogix 5000 project, you must
first add a local communication module and a remote communication adapter.
Complete sections 3.3.1 and 3.3.2 above, before proceeding to step 2 below.
2.) In the I/O Configuration, right mouse click on the Point IO backplane under the
remote communication adapter that you added in step one above and select
“New Module”.
3.) When the dialog screen opens, select the “By Vender” tab and expand the
Spectrum Controls folder.