SkyRC e6650 - Manual (Page 22)

- 21 -
NIMH CYCLE
DCHG>CHG 3
INC DEC
- +
INC DEC
- +
Batt type
Stop
Start
Enter ‘>3 seconds’
NIMH 1.0A 7.42V
D>C 022:45 00890
DCHG 1 1314mAh
CHG 1 1430mAh
Battery
type
Elapsed
time
Discharge
or charge
current
Battery
voltage
Discharged
or charged
capacity
CHARGE/DISCHARGE AND DISCHARGE/CHARGE CYCLE
OF NICD/NIMH BATTERY
CHARGE/DISCHARGE AND DISCHARGE/CHARGE CYCLE
OF NICD/NIMH BATTERY
You can set up sequence on the left and the
number of cycles on the right. Range of the
cycle number is 1-5.
Press BATT TYPE/STOP key to stop
program, you can press START/ENTER key
to alter charge current. The sound indicates
the end of program.
When it approaches to the end, you can see
the capacity of the battery being charged or
discharged. You can press INC or DEC key
to display result of each cycle.
CHARGING OF THE PB BATTERY
Set up the charge current on the left and
nominal voltage on the right. Range of
current is 0.1-5.0A, the voltage should
match the battery being charged. Press
START/ENTER key for more than 3 seconds
to start charging.
Pb CHARGE
4.0A 12.0V(6P)
INC DEC
- +
INC DEC
- +
Batt type
Stop
Start
Enter ‘>3 seconds’
The screen displays the real-time
discharging status. Press START/ENTER
key to alter discharge current. Press
START/ENTER key again to store the
parameter value you set. Press BATT
TYPE/STOP key to end the program.
Pb-6 4.0A 12.59V
CHG 022:43 00682
Battery
type
Elapsed
time
Charge
current
Battery
voltage
Charged
capacity