SkyRC Quattro Micro Battery Charger - Manual

Thank you for your choice of the SKYRC Quattro Micro Battery Charger. This unit is
simple to use but its operation does require some knowledge on the part of the user.
Please read this entire operating manual completely and attentively before using this
product, as it covers a wide range of information on operating and safety.
SKYRC Quattro Micro Battery Charger employs the circuit that features four totally
independent but identical power outputs which are powered 4W each. It is designed for
charging single cell LiPo. Insert the battery lead to the right connector in each port, the
charger will charge 4 batteries at the same time. And the charging current can be
adjusted from 0.1-1A by dial, the charging capacity and cell voltage can be displayed in
each 4-digital LED Indicators.
INSTRUCTION MANUAL
SK-100079
INTRODUCTION
QUATTRO MICRO BATTERY CHARGER
Micro
Micro Reverse
mCPX
MX
4-Digital LED
Indicator
Charging Status
LED Indicator
AC Input
Power Port
100-240V
Rotary Dial
for Setting
Charging Current
Start/Stop
Button
DC Input
Power Jack
11-15V
1