SkyRC e6650 User Manual

Page 19

- 18 -

STORAGE CONTROL OF LITHIUM BATTERY

At this screen, you can set up the current

and voltage of the battery pack. Charging

and discharging will make the batteries

come to the voltage level of “Storage” state.

LiPo STORAGE
1.0A 11.1V(3S)

INC

DEC

- +

INC

DEC

- +

Batt type

Stop

Start

Enter ‘>3 seconds’

This screen shows the real-time status

charging. Press BATT TYPE/STOP key

once to stop the charge process.

Li3s 1.0A 12.59V
STO 022:43 00682

Number

of cells

Elapsed

time

Charge or

discharge

current

Current

voltage

battery

Supplied

capacity

This function is for charging/discharging batteries which are not used

at once. This program is designed for charging or discharging of

batteries of specific original state. They are classified by types: 3.75V

Lilo, 3.85V LiPo and 3.3V LiFe. The program will begin to discharge

if the original state of the battery exceeds the voltage level of storage.

CHARGING LITHIUM BATTERY IN THE STORAGE MODE