Rocktron Intellipitch - Manual (Page 61)

58
C. MIDI Channel
The MIDI Channel function determines the MIDI channel that the Intellipitch receives MIDI commands on.
Turn the FUNCTION SELECT control to "MIDI Channel". Step 1
** MIDI CHANNEL **
Turn the PARAMETER SELECT to view the current MIDI Channel. Step 2
MIDI CHANL OMNI
Use the PARAMETER ADJUST control to select the MIDI channel that the Intellipitch is to
receive MIDI commands on. Channels 1-16, OMNI (all channels), or OFF (will not receive
MIDI commands) may be selected. Step 3
MIDI CHANL 10
Press the STORE button to save the new MIDI channel status. "STORED" will briefly flash on
the display. Step 4
STORED
To exit the MIDI Channel function, turn either the PRESET or FUNCTION SELECT control.
Any changes made must be stored to be saved after exiting the MIDI Channel function.
1 2 3 4