Rocktron Intellipitch - Manual (Page 60)

57
The number on the left of the display is the MIDI program number (or the number sent via a
MIDI footswitch, etc.). Use the PARAMETER SELECT control to select the number (1-128) to
be mapped to a preset.
The number on the right of the display is the preset number to map to (or the preset number that
will be recalled when the MIDI program number on the left is sent). Use the PARAMETER
ADJUST control to select the preset number (1-160, or OFF) to map to.
Step 6
Step 7
110 MAP TO XXX
MIDI program number
(1-128)
110 MAP TO 56
Preset number
(1-160, OFF)
Press the STORE button after each MIDI program number and preset number have been selected
to save the change for each mapping. "STORED" will flash briefly on the display. Step 8
STORED
The Program Mapping function may be exited by turning either the PRESET or FUNCTION
SELECT control. Only the changes that have been stored will be saved after exiting the Program
Mapping function.