Rocktron Intellipitch - Manual (Page 30)

27
At the root of each preset’s sound is its configuration. The configuration determines
(a) the active effects for a given preset,
(b) the adjustable parameters available for a preset, and
(c) the order in which the effects are routed in the signal path.
The Intellipitch provides 8 highly flexible configurations capable of producing sounds
which previously could only be obtained by patching numerous effects together. These
configurations offer many simultaneous effects without suffering any degradation of the
sound quality of each effect.
The available Intellipitch configurations are configured as follows:
ΠHUSH / Chorus / Delay / Reverb
 HUSH / Reverb
Ž HUSH / Delay / Ducker
 HUSH / 8 Voice Chorus / Delay
 HUSH / Pitch Shift / Delay
‘ HUSH / Pitch Shift / Delay / Reverb
’ HUSH / Intelligent Shift
“ HUSH / Reverse Shift
Selecting a Configuration
To select a specific configuration, press the CONFIG button—the CONFIG LED
above the button will light and the Intellipitch will display the configuration for the current
preset. Turning the PRESET control while in this mode will step through each preset,
displaying each preset's configuration instead of its preset number and title.
If a particular configuration is required for a specific preset location, locate an
existing preset that uses that configuration and copy it into the desired location. (See the
section entitled
"Storing Modified Parameter Values" in section 8 for more information on
copying presets.)
The basic signal path arrangements for each of the Intellipitch configurations are
shown in this section, as well as their respective parameter lists. These diagrams
illustrate the various signal flow possibilities available via the MIX, PAN and LEVEL
controls located at various points in the signal chain.
7. Configurations