Rocktron Intellipitch - Manual (Page 59)

56
B. MIDI Program Mapping
Program mapping allows for an Intellipitch preset number to be mapped (or assigned) to a different MIDI
program number. The Intellipitch is initially programmed at the factory to access to the lower 128 presets (i.e.
program number 1 is mapped to preset 1, 128 to 128, etc.)
To access the Program Mapping function, turn the FUNCTION SELECT control one step past the
Controller Assign function. Step 1
** PROG MAPPING **
Use the PARAMETER SELECT control to select the first parameter—Program Mapping Status.
This parameter determines whether program mapping is on or off. When program mapping is
OFF, the preset number recalled is identical to the program number sent via MIDI. When ON,
the preset number recalled is the preset that the program number sent is mapped to. Step 2
PROG MAPPING OFF
Step 3 Select whether the program mapping is to be ON or OFF via the PARAMETER ADJUST
control.
PROG MAPPING ON
Step 4 Save the current Program Mapping status by pressing the STORE button. "STORED" will flash
briefly on the display.
STORED
Turn the PARAMETER SELECT control one step clockwise to view the current map settings.
This parameter allows you to map MIDI program numbers to specific presets. Step 5
XXX MAP TO XXX
3,7 4,8 1 2,5,6