Hush / pitch shift / delay / reverb configuration – Rocktron Intellipitch User Manual

Page 42

Text mode
Original mode

HUSH / PITCH SHIFT / DELAY / REVERB Configuration

This configuration combines

HUSH

noise reduction with 2 voices of pitch shift/delay, along with a separate

third delay. This is followed by a ducking feature for the delayed signals and reverb.

Note:

When the Delay Time for any voice is set to zero, that voice is taken out of the

regeneration loops. This will allow for higher regeneration levels (if needed). It
also allows for a more pure sounding decay of the echo when used with other
voices set at long delay times.