Rocktron Intellipitch - Manual (Page 19)

16
PAN This allows for the panning of each delay to the left or right output, if
desired. The Pan parameter is adjustable from 0 to 100 - where 0 =
full left, 100 = full right and 50 = center.
DLY TIME These parameters determine the amount of time after a signal is input
that the delayed signal will begin to reproduce the input signal.
REGEN This parameter is provided for each delay and determines the number
of times the delayed signal will repeat itself. This is achieved by
feeding the delayed output back into the input. Higher levels of
regeneration will result in more repeats.
D TYPE The Delay Type parameter determines whether the Stereo, Ping-Pong
or 2-Tap delay type is currently active.
DL HF DAMP Delay High Frequency Damping determines the amount of high
frequency content in the delayed and regenerated signals. Higher
amounts of damping will result in less high frequency information in
the delayed signal.