Parr Instrument 4857 - Manual (Page 24)

4857 Reactor Controllers
- 24 -
M ODULE 1: T EMPERATURE C ONTROL M ODULE ( CONTINUED )
Temperature Programmer (continued)
Running a Program:
1. From the main instrument screen, right click and select "Properties >> Module 1."
2. Then double click on "Module 1 - Programmer" and select your desired program number.
Click Apply, and then change the value of "run mode" to "on." Hit OK. If you need to
interrupt the program, returning to this screen and changing the value of "run mode" to "off"
will halt the program.