Martin Christ Epsilon 2-10D LSCplus - Manual (Page 65)

Freeze-dryer EPSILON 2-10D LSCplus
6 Operation
Version 04/2013, Rev. 1.5 of 16/12/2014 • sb
65
Translation of the original operating manual
NOTE
Always indicate the error code in the event of enquiries or service
requests!
Fig. 54: Dialog box "Failure memory"
Vacuum pump oil change (4)
The system monitors the oil change interval of the vacuum pump. The
interval can be adapted to the vacuum pump model and utilisation.
When the end of an oil change interval is reached, a corresponding
message will be displayed.
• Acknowledge the message.
• Change the oil of the vacuum pump.
• Reset the operating hour counter in the dialog box “Vacuum pump oil
change” by pressing the “reset” button.
Fig. 55: Dialog box "Vacuum pump oil change"