Martin Christ Epsilon 2-10D LSCplus - Manual (Page 61)

Freeze-dryer EPSILON 2-10D LSCplus
6 Operation
Version 04/2013, Rev. 1.5 of 16/12/2014 • sb
61
Translation of the original operating manual
Operator/maintenance/administrator password: For each of these access
levels, certain editing rights have been defined.They can be enabled with
the corresponding password.
The rights of the various access levels are detailed in the following table.
Action Operator Maintenance Administrator
Editing of the data of the current
process run (e.g. selection of the
operating mode, changing of set
values)
Editing of maintenance functions
(e.g. oil change of the vacuum pump)
--
Editing of the default settings
(e.g. editing of the access protection,
creating and editing of programs,
editing of system settings)
-- --
Device options (5)
This dialog box lists all of the device options that are available for the unit in
question. A list of all the possible options can be found at chapter 6.6 -
"Optional extensions and special equipment". Options that require a series-
number-specific release code are marked with the symbol (" ").
Fig. 49: Dialog box “Device options” (example)
If the freeze-dryer is to be extended by an option, this option must be
enabled via this dialog box.
• Press the button "Add option". An input window opens.
• Enter the six-digit Christ activation code that was supplied for this
option. Note that the keys are case sensitive.
Options can be removed in the same way.
NOTE
The modifications will not become effective until after a restart of the unit.