Martin Christ Beta 2-8 LDplus - Manual (Page 48)

48 LDplus Control System Operating Manual Freeze Dryer BETA 1-8 LDplus / BETA 2-8 LDplus
As an option, it is possible to change over to the next phase
automatically when the preselected time is over.
This applies only to a phase change from:
Freezing Warm-up vacuum pump
Main drying Final drying
The option can be activated under Menu -> Options ->
Settings -> Automatic phase change.
5.7. Main menu
The main menu can be activated by pressing the right-hand
softkey Menu
in the active values window.
The following section explains all menu items in detail:
5.7.1. Change set values
Used to define the phases “freezing”, “main drying” and “final
drying”.
First select the phase.
Select the set value using the focus.
Press the right-hand softkey Edit to start the editing mode.
The focus is displayed in an inverted manner. You can now
change the set value within a permissible range using the “up”
and “down” keys.
Press OK to confirm the set value or Cancel to reject it.
The editing mode is quit.
Softkey for
opening a
menu item
Scrollbar
Menu title
Softkey for
quitting the
menu
Focus
Menu list