Luxul XBR-4400 - Manual (Page 7)

7
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
2.1.2 Rear Panel
XBR-4400 Rear Panel
Power Input: Please use the included power cable
2.2 System Requirements
„
Network Connections: 802.3 Ethernet Enabled Computer
„
Web Browsers: Supported Web browser versions include I.E. 9, Firefox 25, Safari 5,
Chrome 30, and up. The Web browser is used to configure the XWR-1750.
„
Internet: Broadband Internet Service (depending on the service provider, a separate
modem may be required)
2.3 Installation Requirements
„
Install the XBR-4400 in a stable/safe place to avoid any possible damage
„
Inspect the AC power cord to ensure that it is correctly connected and undamaged
„
To avoid electric shock, DO NOT open the XBR-4400 housing (no user serviceable
parts inside). Opening the XBR-4400 will void your warranty.
„
It is recommended that the Grounding connection to the outlet is functioning
properly and the XBR-4400 is positioned away from direct sun light
„
Ensure there is sufficient space around the XBR-4400 for proper ventilation and heat
dissipation. It is recommended to have at least 4-6 inches around all sides.
2.4 XBR-4400 Installation
Before installing the XBR-4400, test the Internet connection to validate that it is
functioning properly. When Internet access has been confirmed, follow the steps below
for Router installation.
„
Establish LAN Connection
Connect one of the XBR-4400 LAN port to a switch, access point, or computer
„
Establish WAN Connection
Connect the Internet cable to the XBR-4400 WAN port
„
Connect AC Power
Connect the included AC power cable to the XBR-4400 first and then to the AC outlet.