Luxul XBR-4400 - Manual (Page 13)

13
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
„
Local Network / LAN: Displays the Local Network IP Options
w
LAN IP Address: Allows you to configure the LAN IP of the Router, this will be used
by all devices in the LAN as the Default Gateway. If you are installing other Luxul
devices we recommend keeping the default IP of 192.168.0.1.
w
LAN Subnet Mask: Allows you to specify the Subnet Mask to be used in the LAN.
The default value of 255.255.255.0 is recommended unless specified otherwise by
your Network Administrator.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
NOTE: After making any changes to the Internet / WAN and/or Local
Network / LAN you must click the Save button to Save your
changes, then you must click the Reboot button for the changes
to take effect. You can click the Save button and proceed to
other pages without losing your configured changes.