Xbr-4400 – Luxul XBR-4400 User Manual
Page 12
12
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
w
Static IP: Allows you to enter the WAN connection IP Address specified by your
ISP.
w
Netmask: Allows you to enter the WAN connection Subnet Mask specified by your
ISP.
w
Gateway: Allows you to enter the WAN connection Gateway IP Address specified
by your ISP.
w
Primary DNS: Allows you to manually configure the Primary DNS Server IP Address
specified by your ISP or any third party DNS Server IP Address. With the Static IP
Connection Type specified this is a required field.
w
Secondary DNS: Allows you to manually configure the Primary DNS Server IP
Address specified by your ISP or any third party DNS Server IP Address. With the
Static IP Connection Type specified this is a required field.
w
Custom MAC Address: Allows you to set a Custom MAC Address which allows the
Router to appear as a Computer to the ISP Modem. (Some Modems will cache the
MAC Address of the first device used to setup Internet Service and cannot be reset
by the user. If this occurs you can clone that setup Device’s MAC Address to allow
the XBR-4400 to connect to the Modem.)
w
Custom MTU: Allows you to configure a Custom MTU setting. MTU or Maximum
Transmission Unit, is the maximum packet size allowed on the network. Some ISPs
(usually DSL or Fiber) will require this value to be set if the Modem is in a Bridge
mode.
NOTE: After making any changes to the Connection Type you must click the
Save button to Save your changes, then you must click the Reboot
button for the changes to take effect. You can click the Save button
and proceed to other pages without losing your configured changes.
3.1.4 Local Network / LAN
This Connection Type option requires the Static IP, Netmask, Gateway, Primary DNS and
Secondary DNS provided by your ISP to be entered manually. This type will never have
an IP Address change on the connection and is typically used in Business or Remote
Access implementations.
Select the Menu
Quick Setup to view the following page: