Luxul XBR-4400 - Manual (Page 20)

20
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
w
Hostname: Allows you to enter the Dynamic DNS Hostname you configured for
this Router in your DDNS account. This will be only the Hostname (i.e. mydomain.
dyndns.org) do not include any headings like www. or http://.
w
Username: Allows you to enter the Username used when authenticating to your
DDNS Provider account. This is the same Username you would use to log in to their
Web Site.
w
Password: Allows you to enter the Password used when authenticating to your
DDNS Provider account. This is the same Password you would use to log in to their
Web Site.
w
Check Interval: Allows you to set how often in minutes the DDNS client on the
Router will check for a WAN IP Address change. Ten minutes is the default setting,
we do not recommend lowering this value as it can consume excess CPU resources.
w
Force Update Interval: Allows you to set how often in Days the DDNS client on
the Router will push an Update to your DDNS Provider. Three days is the default
setting, we do not recommend raising this past 30 days as all three supported
Providers will age out the Hostname at 30 days.
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
NOTE: After making any changes to Dynamic DNS you must click the Save
button to Save your changes, then you must click the Reboot button
for the changes to take effect. You can click the Save button and
proceed to other pages without losing your configured changes.
3.3.4 Multi-WAN (Future Release)
This page displays the Multi-WAN Settings currently configured on the Router.
Select the menu Network>>Multi-WAN to display the following page.
„
This feature is currently under construction. To be notified of Firmware Releases
including new features please Join our Mailing List at
http://luxul.com .
3.3.5 VLAN
This page displays the VLAN Settings currently configured on the Router.