Luxul XBR-4400 - Manual (Page 6)

6
XBR-4400
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-4400 Vers: 07314
„
Reset Button: Used for hard reset or factory default reset. To hard reset the router,
press and release the button. To reset to factory defaults, press and hold this button
for 15 seconds.
CAUTION: Resetting the XBR-4400 to factory defaults will remove all
custom settings
LED Indicators:
Indicator Description Function
POWER Power LED ON indicates the XBR-4400 has power.
SYSTEM System Status LED Flashing indicates the XBR-4400 is functioning
correctly
ON indicates the XBR-4400 is booting. .
Off indicates the system is not functioning
correctly.
WAN/LAN Green WAN/LAN Speed/
Activity LED ON indicates the WAN/LAN port is connected
correctly and is operating at 1000Mbps.
Flashing indicates data packets are being
transferred.
WAN/LAN Yellow WAN/LAN
Speed/Activity LED ON indicates the WAN/LAN port is connected
correctly and is operating at 1000Mbps.
Flashing indicates data packets are being
transferred
USB USB LED This LED will be enabled at a later date with
firmware udates
„
WAN: 1 WAN RJ-45 Ethernet Port for connecting internet feed.
„
LAN/WAN: 3 LAN/WAN RJ-45 Multi-Access Ethernet Ports allowing for up to four
independent internet feeds, or up to four local network connections.
„
LAN: 1 LAN RJ-45 Ethernet Port for connecting to the local network.
NOTE: It is recommended that a Luxul switch be used in conjunction
with the XBR-4400 to increase number of local ports available.