Luxul XBR-4400 - Manual (Page 41)

41
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
3.8.1 Iperf
This page displays the Iperf settings of the Router.
Select the menu Tools>>Iperf to display the following page.
„
Iperf Server: Displays the Iperf Server Status.
w
Status: Displays the current Running Status of the Iperf Server.
w
Run for: Allows you to choose how long you would like the Iperf Server to run.
One Hour is the default setting with two and three hours available.
w
Action: Allows you to Start the Iperf Server. Click the Start Iperf Server button to
Start the Iperf Server.
NOTE: The Iperf Server runs only for the specified time and will shut down
after that period has elapsed to prevent any potential overuse of
resources.
3.8.2 USB (Future Release)
This page displays the USB Settings currently configured on the Router.
Select the menu Tools>>USB to display the following page.
„
This feature is currently under construction. To be notified of Firmware Releases
including new features please Join our Mailing List at
http://luxul.com .
FCC STATEMENT:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions may cause harmful interference to radio
communications. However; there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the